Technical data

Server Software and Utilities
2-6
•
Choosing the “
Exit
” menu allows you to:
−
Select “
Save Changes & Exit
” to save all Setup values and exit
Setup.
−
Select “
Exit Without Saving Changes
” to exit Setup without
recording any changes.
−
Select “
Get Default Values
” to set all setup options to their
factory default values.
−
Select “
Load Previous Values
” to restore all setup values from
the last session.
−
Select “
Save Changes
” to save all setup selections without exiting
Setup.
Changing Your Server’s Configuration
The following sections provide detailed information on changing your server’s factory
configuration. Before changing any setting, make sure you fully read and understand
the information provided and view any on-line help for a selected setting.
Changing Time and Date
To change the time and date:
1. Reboot the server.
2. Press <F2> when the DIGITAL logo screen appears.
3. In the Main menu, using the cursor keys and [Tab], select (highlight) the
System Time or System Date field you want to change.
4. Use [+] or [-] to change the field to the desired value.
You can also enter the desired date and time by typing the required
numbers.
5. Press [Esc] then [Enter] twice to exit the BIOS Setup utility and to reboot the
server so changes immediately take effect.