Technical data

Troubleshooting
13-13
Hot Swap Drive Troubleshooting (Model 3220)
Problem Possible Cause Action
Drive fault LED lit. Drive failed. Replace hot swap drive.
Drive activity and fault
LEDs lit.
Drive is hung or has failed. Replace hot swap drive.
Drive fault LED flashing. Drive is in recovery mode
or has failed and is spinning
down.
Allow the drive array to build or fully
spin down.
Hot Swap Drive Troubleshooting (Model 3220R)
Problem Possible Cause Action
Drive status LED lit. Drive failed. Replace hot swap drive.
Drive status and fault status
LEDs lit.
Drive is hung or has failed. Replace hot swap drive.
Fault status LED flashing. Drive is in recovery mode
or has failed and is spinning
down.
Allow drive array to build or fully
spin down.
Disk drive present LED off. No drive installed or not
fully seated in the drive bay.
Reseat the drive or make sure the
installed drive is fully seated in the
drive bay.