Technical data

Connecting SCSI and RAID Devices
11-2
5. Replace the access panel(s).
6. Connect all external devices and then power on your server.
7. Run the SCSI Configuration utility to configure your server.
Refer to Chapter 2, “Server Software and Utilities,” and your SCSI
documentation for additional configuration information.
Figure 11-1
Legend
Component
A Cable terminator
B SCSI tape drive
C IDE CD-ROM drive
D 68-pin SCSI connector to storage backplane (SCSI channel 1)
E Storage backplane
F SCSI adapter
G External connector SCSI adapter channel 0
H External connector SCSI adapter channel 1
I 68-pin SCSI cable to SCSI knockout
J External terminator
K SCSI channel 2 connector
L SCSI channel 1 connector
M IDE connector
N 68-pin single-ended SCSI terminator (model 3220 only)