Technical data

Installing Storage Devices (DIGITAL Server 3220R)
9-13
Hot Swap Drive Status LEDs
Activity Status
LED (Top) Green
Fault Status LED
(Center) Amber
Drive Present, Power
On LED (Bottom)
Green
Indication
Off Off On Drive is present with power.
Flashing Off On Drive is present with power and is
being accessed.
Off On On Drive can be replaced. Steady
yellow fault light indicates the drive
has a problem. Power to the drive
is off.
Off Slow flashing On Drive must not be replaced at this
time. A slowly flashing yellow fault
light indicates a drive that has just
been replaced is in recovery mode
(drive array being built), or drive
failed and is spinning down.
Power to the drive is on.
Off Off Off There is no drive installed in the
hot swap drive bay, or the drive is
not fully seated in the bay.