Technical data

Installing Storage Devices (DIGITAL Server 3220R)
9-12
Hot Swap Drive Status LED Indicators
The storage backplane monitors hot swap drive status to identify error conditions or
failures. The following list describes each LED.
•
The top LED (green) is the activity status LED and is on or flashing when the
hot swap drive is active.
CAUTION:
For non-RAID adapters, removing a hot swap
drive when the top LED is on or flashing can cause the loss
or corruption of data.
•
The center LED (amber) is the fault LED and indicates an error condition
when it is either on or flashing.
•
The bottom LED (green) indicates that the hot swap drive is installed and
powered on.