Technical data

Installing Storage Devices (DIGITAL Server 3220)
8-2
5. Attach the supplied drive brackets to the device.
a. Ensure that the tab on the left bracket is up (A, Figure 8-1) and the
tab on the right bracket is down.
b. Install two screws in the front holes (B, Figure 8-1) and in one rear
slot. (When installed, the labeling on the right bracket will be upside
down.)
6. Insert the device into the drive bay slot from the front.
7. Secure the device to the slot using the supplied pan-head mounting screw.
Refer to Chapter 11, “Connecting SCSI Devices and RAID Adapters,” for power
and SCSI cable connections.