Technical data

SCSI Device Configurations
7-8
Cables
Your server comes with the following cabling arrangements:
•
One IDE cable with two connectors (one to the main logic board, the other to
an IDE device).
•
Wide SCSI cable with two connectors connected to the wide SCSI
connector on the main logic board and to the bottom 68-pin wide SCSI
connector on the storage backplane.
•
SCSI cable for SCSI channel 2 with two connectors (not connected).
Refer to Chapter 11, “Connecting SCSI and RAID Devices,” for cabling
diagrams.