Technical data

Installing Additional Memory
6-7
6. Insert the DIMM straight down into its socket. Apply equal pressure to both
ends of the DIMM until it fully seats in the socket.
The plastic hold-down/ejector tabs snap into place when the DIMM is
inserted correctly.
7. Continue installing DIMMs to complete your memory upgrade.
8. Replace the processor module.
9. Replace the side panel or top cover.
Refer to Chapter 3, “Server Components,” for more information.
10. Connect all external devices and restore power.
11. Reboot the server to configure it for the additional memory.
For more information, refer to Chapter 2, “Server Software and Utilities,” for
information on using the BIOS Setup utility.