Specifications

Appendix A. Specifications
14
J2 (RJ-45 Connector)
J2 is an 8-pin RJ-45 connector that supports both 10BASE-T and 100BASE-TX Ethernet LANs. This
requires the use of Category 5 UTP cable. Pin assignments are given in the "J2 (RJ-45 Connector)
Pinout" table.
J2 (RJ-45 Connector) Pinout
Pin # Signal
Pin 1 TX+
Pin 2 TX-
Pin 3 RX+
Pin 6 RX-
Pins 4 & 5 Unused pair. These pins are terminated on ZT 6650.
Pins 7 & 8 Unused pair. These pins are terminated on ZT 6650.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com