Specifications

CHAPTER 2. GETTING STARTED
This chapter summarizes the information you need to get your ZT 6650 up and running. You should
read this chapter before you attempt to use the board.
UNPACKING
Please check the shipping carton for damage. If the shipping carton and contents are damaged,
notify the carrier and Ziatech for an insurance settlement. Retain the shipping carton and packing
material for inspection by the carrier. Do not return any product to Ziatech without a Return Material
Authorization (RMA) number. Appendix B explains the procedure you should follow to obtain an RMA
number from Ziatech.
WHAT'S IN THE BOX?
After opening the shipping container, check for the following contents:
• The ZT 6650 CompactPCI board
• Anti-static packing material
• On-Line Help disk for the ZT 6650
• Paper version of the ZT 6650 Operating Manual (if ordered)
If any of the above items is missing, contact Ziatech for assistance. Be sure to save the anti-static
packing material for storing or shipping.
WARNING!
Like all equipment utilizing CMOS devices, the ZT 6650 must be protected from static discharge.
Never remove any of the socketed parts except at a static-free workstation.
SYSTEM REQUIREMENTS
The ZT 6650 is designed for CompactPCI bus applications and is therefore mechanically and
electrically compatible with the
CompactPCI Bus Specification.
The board requires +5 VDC ±5% at 840 mA maximum, 640 mA typical. The relative humidity must be
less than 95% at 40° C, non-condensing. Refer to Appendix A for additional specifications.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com