Owner`s manual

3–27Hub Manager
[11] Set Out-of-Band Interface Port Speed
Set out-of-band interface port speed option prompts you to select and enter the
speed of your out-of-band management (OBM) port.
NOTE
The port speed at each end of the communications
link must be identical.
The factory default of this menu option sets the out-of-band port speed to 9600.
The following is an example of the dialog associated with this option
(user response is shown in boldface type):
Enter selection : 11
DEChub 900 MultiSwitch
SET OUT-OF-BAND MANAGEMENT INTERFACE PORT SPEED
[1] 1200 baud
[2] 2400 baud
[3} 9600 baud
[4} 19200 baud
[5} 38400 baud
Enter selection [3] (9600) :3
Return
OBM port speed set.
Press Return for Main Menu ...