Owner`s manual

Enter the hub’s OBM IP
address, then press Return.
3–26 DEChub 900 MultiSwitch Owner’s Manual
[10] Set Out-of-Band Interface IP Address
Set out-of-band interface IP address option prompts you for an IP address in the
standard 4–octet dotted decimal notation, in which each octet of the address is rep-
resented as a decimal value, separated by a decimal point (.). If an IP address was
previously configured, an out-of-band IP address will be displayed. To remove an
OBM IP address, enter 0.0.0.0 in the appropriate address field.
The OBM feature allows you to manage your DEChub 900 MultiSwitch through the
OBM port as an alternative to normal in-band management. To enable out-of-band
management, you need to assign an OBM IP address and select an OBM port speed
from the DEChub 900 MultiSwitch Installation Menu.
The factory default of this menu option deletes out-of-band IP address.
The following is an example of the dialog associated with this option
(user response is shown in boldface type):
Enter selection : 10
DEChub 900 MultiSwitch
IP ADDRESS CONFIGURATION
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by ’.’ character.
example: 16.20.40.156
To delete the address, enter 0 in the appropriate address
field.
IP address [ ] : 16.20.54.156
Return
IP Address set.
Press Return for Main Menu ...