Owner`s manual

If you are upgrading a net-
work module, enter its slot
number, then press Return.
Select Y if you want to
use the OBM port,
then press Return.
This screen dialog appears
only when you select Y to use
a different network interface.
3–25Hub Manager
[9] Downline Upgrade (Cont.)
The following setup port screen is an example of the dialog you see when you
upgrade the Hub Manager using a network module with IP services in Hub slot 8.
Enter the slot to be upgraded [9] (Hub Manager) :
Return
Enter the load filename [ ] : filename.ext
Return
Enter the Load Host IP address [ ] : 16.20.40.155
Return
Load will be initiated over Hub Slot 8 network interface.
Would you like to use a different network interface Y/[N] : Y
Return
Interface Description
––––––––– –––––––––––
1 OBM Port
9 Hub Slot 8
Enter the network interface to be used [9] :
Return
The module becomes nonfunctional for up to 10 minutes
during the time that the flash load is in progress.
...Press Return Key to Start Load [Ctrl/C to abort] ...
DLU process started!
..................................................................
................
Transfer complete.