Owner`s manual
Enter the trap address to
delete,then press Return.
3–17Hub Manager
[6] Delete SNMP Trap Addresses
Delete SNMP trap addresses option prompts you to select SNMP trap addresses
and delete it from the community trap address table.
The format for an SNMP trap address is the standard 4-octet dotted decimal nota-
tion, where each octet of the address is represented as a decimal value, separated
by a decimal point (.).
The following is an example of the dialog associated with this option
(user response is shown in boldface type):
Enter selection : 6
DEChub 900 MultiSwitch
DELETE SNMP TRAP ADDRESSES
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by ’.’ character.
example: 16.20.40.156
Configured SNMP Trap Addresses: 16.20.40.156
Trap address [ ] : 16.20.40.156
Return
Trap address deleted. Delete another? [none] :
Return
Press Return for Main Menu ...