Owner`s manual

Enter a trap address, then
press Return.
3–16 DEChub 900 MultiSwitch Owner’s Manual
[5] Add SNMP Trap Addresses
Add SNMP trap addresses option prompts you to enter IP addresses to which SNMP
traps will be sent from the DEChub 900 MultiSwitch.
The format for an SNMP trap address is the standard 4-octet dotted decimal nota-
tion, where each octet of the address is represented as a decimal value, separated
by a decimal point (.).
The factory default of this menu option deletes all SNMP trap addresses.
The following is an example of the dialog associated with this option
(user response is shown in boldface type):
Enter selection : 5
DEChub 900 MultiSwitch
ADD SNMP TRAP ADDRESSES
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by ’.’ character.
example: 16.20.40.156
To delete the address, enter 0 in the appropriate address
field.
Trap address [ ] : 16.20.40.157
Return
Trap address added! Add another? [none] :
Return
Press Return for Main Menu ...