Owner`s manual

3–14 DEChub 900 MultiSwitch Owner’s Manual
[3] Show Current Settings
Show current settings option shows you the current settings of the Hub Manager. If
the DEChub 900 MultiSwitch is being configured for the first time, some fields will be
blank. HUBwatch or SNMP can be used to set or modify these values.
The following is an example of the dialog associated with this option
(user response is shown in boldface type):
Enter selection : 3
DEChub 900 MultiSwitch
DEChub900MultiSwitch,DEChub 900 MultiSwitch,HW=F,RO=V1.1.6,SW=V3.0.0
SysUpTime : 11 days 18:52:25 100 resets
SNMP Read/Write Community : public
SNMP Trap Addresses : Not Configured
Status of last Downline Upgrade : 00:40:39 27 resets
Load Successful
In-Band Interface status : Active
In-Band Interface IP Address : 16.20.155 Slot number : 7
Out-of-Band (OBM) Interface IP Address : 16.20.156
Out-of-Band (OBM) Management Port Speed : 9600
Hub Name :
Hub Serial Number :
Hub Location :
Press Return for Main Menu ...