Owner`s manual

3–12 DEChub 900 MultiSwitch Owner’s Manual
Hub Setup Port Menu Options
[1] Reset with Factory Defaults
Reset with factory defaults option boots the DEChub 900 MultiSwitch Hub Manager,
initiating self-tests causing its configured NVRAM parameters to be initialized to fac-
tory default values. All local nonvolatile settings except the Hub Serial Number, will
be lost.
CAUTION
!
This action deletes all configuration settings and
replaces them with factory default values. All con-
figuration settings will be lost.
The following is an example of the dialog associated with this option
(user response is shown in boldface type):
Enter selection : 1
DEChub 900 MultiSwitch
RESET WITH FACTORY DEFAULTS
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* IMPORTANT! IMPORTANT! IMPORTANT! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This selection will delete the current configuration *
* settings and reset the system with the factory default *
* settings. All configuration settings will be lost. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Press Y to confirm [N] : Y
Return
Using factory settings. Waiting for reset ...