Owner`s manual

3–8 DEChub 900 MultiSwitch Owner’s Manual

Table 3–3: Hub Status Display Messages (Cont.)

Display Message

Description

This message display occurs only by setting MIB

objects sysName and/or sysLocation. You can

enter up to 80 characters for each of these MIB

objects, but only the first 20 characters of each MIB

object is displayed in the Hub Status Display. If set,

these names are also displayed when you select

the Show Current Setting option from the DECHub

900 MultiSwitch Installation Menu.

This message display occurs whenever the Hub

Manager detects an important state change in the

hub. If a state change occurs, a display message

describing the event will immediately appear in the

display. Event notice messages will be displayed

longer than other Hub Status Display messages.

Event messages are not queued and, therefore,

when multiple events occur close in time, they may

not all be displayed. Examples of events include: a

module being inserted or removed, a change of

module health text, or a change of module status.