Owner`s manual

3–7Hub Manager
Table 3–3: Hub Status Display Messages (Cont.)
Display Message
Description
Power Status: No N+1
System Power: 15.0W
or
Power Status: N+1
System Power: 15.0W
This message displays either of two messages
regarding the hub’s power system status. In
the first display message example, the status
indicates power is okay, but redundant power
(No N+1) is not available. In the second dis-
play message example, the status indicates
redundant power (N+1) is available. In both
examples, System Power: 15.0W refers to the
power supplied to the hub chassis.
Available: xxx.x W
5V: xx.x A 15V: xx.x A
This message displays the total available
power in watts (W), and the available current in
amperes (A) for 5 volts and 15 volts.
Checking Power
System Status
This message display only appears when a
power supply module is installed or removed.
Depending on the Hub Status Display mes-
sage sequence, you may not see this mes-
sage.
(continued on next page)