Owner`s manual

3–6 DEChub 900 MultiSwitch Owner’s Manual
Table 3–3: Hub Status Display Messages (Cont.)
Display Message
Description
1: <module name>
<message>
or
1:DECagent 90
Hub Master
This message displays the status of all the
occupied slots in the hub, starting with slot 1.
The display shows the slot number, the mod-
ule’s name, and one of three types of mes-
sages: a health string message, module sta-
tus, or ! Not Enough Power ! message. If ! Not
Enough Power ! is displayed, the module is not
powered. Some DEChub 90 series module
display messages may differ.
If a DECagent 90 is installed and configured as
the hub master, a hub master message
appears. Refer to chapter 4 for additional
information.
2 7
Available Slots
or
2 7
!No More Power!
This message displays either the empty slots
and an Available Slots message if sufficient
power is available, or displays the empty slots
and a !No More Power! message if there is
insufficient power. In the first display mes-
sage example, slots 2 and 7 are available and
half-height modules can be added in these
slots. Note, for full–height modules to be
added in available slots, separate power cal-
culations must be performed. In the second
display message example, the current power
supply modules cannot provide additional
power to any available slots.
(continued on next page)