Owner`s manual

2–8 DEChub 900 MultiSwitch Owner’s Manual
Attaching the Mounting Hanger
Perform the following two steps to mount the hanger to the chassis (see Figure 2–4):
1. Attach the wall mounting hanger (1) to the back of the chassis using six
#6–32 screws.
2. Attach the rubber feet (2) to the back of the chassis using two #6–32 screws.
Figure 2–4: Attaching the Mounting Hanger
Rear of
chassis
Wall
mounting
hanger
LKG-8997-94I
1
2