Owner`s manual

2–2 DEChub 900 MultiSwitch Owner’s Manual
Checking the Contents
Before you begin the installation, unpack the contents of the box and be sure that you
have the parts listed in Table 2–1.
Table 2–1: Dechub 900 MultiSwitch Kit Content
1
Quantity
Item
1
DEChub 900 MultiSwitch chassis
1
Power supply module
1
ac power cord
2
Rack mount brackets (one left, one right)
1
H3108–CR cable ring bracket
10
#6–32 x 5/16-inch machine screws
8
#10–32 x 1/2-inch machine screws
8
#10–32 U-nuts
1
Wall mounting bracket
1
Wall mounting hanger
2
Rubber feet
9
#8 wood screws
4
#8–32 x 1/2-inch machine screws (used with DERMS–AA)
1
Cable, 8 MP to 6 MMP (BN24H)
1
Cable adapter, 6 MMJ to 25-pin D-Sub (H8575–A)
1
License, assembly kit
1
DEChub 900 MultiSwitch Owner’s Manual
1
Appendix A lists the country specific kit variations and other related parts.
Gathering the Tools
Use the following tools to install the chassis:
• A Phillips screwdriver
• A drill with a 1/8-inch (3.1 mm) bit (for wall mount only)
You are now ready to install the chassis.