User`s guide

2
In section: Correct the following information
Section 4.3.2 The NPmanage utility provides the ability to change the printer
name used by the EtherTalk protocol. The change does not
effect the name used by LocalTalk, if you are using both. The
default name is DEClaser 5100.
If you have more than one printer, Digital recommends that you
change the name to something of your own choice rather than
relying on the NIC to make the names unique. The NIC adds a
number to the default name, in the order in which the printers
are turned on. However, in the normal course of managing
printers, you turn printers off and on as necessary, with the
result that the NIC may assign a name again but to a different
printer. To avoid confusion, give each printer its own name.
When you change the name of a printer, be careful not to leave
the name blank. The NPmanage utility accepts a null name as
an authentic name but it would be difficult to identify and
manage this printer.
Section 4.3.2 In Step 2, the documentation describes a list of available
AppleTalk Zones. However, if you do not have multiple zones,
you do not see a list of zones. Your zone is already selected.
Section 6.1 The reference to Appendix E should refer to Appendix C.1.3.
Section 6.2 The reference to Appendix E should refer to Appendix C.2.
Known Limitations
The following items are not supported in this version of the product:
• The NPmanage utility for the Apple platform does not include balloon help.
• In a NetWare environment, the banner page cancels a PCL context because the banner
invokes the PostScript interpreter. This means that if you downloaded any PCL fonts,
they are lost when a print job uses a banner page. The workaround is to print without
banner pages.