User`s guide

1
Corrections
Documentation Errata
This section contains notes on the DEClaser 5000 Series Ethernet Card User's Guide. The
following information should have been included in the User’s Guide.
In section Include the following information:
Section 1.3 The PSPrinter program is on the diskettes that come with the
printer, not with the NIC.
Page 2-5 The wrist strap shown in Step 3 is optional. To discharge static
electricity during an operation, touch a metal part of the printer.
Page 2-6 When you use a BNC T-connector to connect the NIC to the end
of the network, use a terminator on the remaining side of the T-
connector.
Page 2-6 The NIC shown in Step 4 should include the daughter card.
Chapter 3 When you use the nsconfig or NPmanage utilities to change
values, the changes are made to NVRAM and take effect when
the printer is powered off and on again or when the NIC is reset
using the NPmanage utility.
Section 4.1 The illustration shows an icon for the PSPrinter that may not be
the current one.
Continued