User`s guide

TCP/IP Configuration
5-15
5.4.6 SCO UNIX
The nicinst command creates the /usr/nic directory and copies some files. It then starts a
script that prompts you for information. After you complete the script, you add the
information to the lp utility.
Enter the following commands:
lpadmin -P printer_name -v /dev/nic/printer_name
enable printer_name
accept printer_name
where printer_name is the name specified during the nicinst procedure. You can also use
the other options for the lpadmin command.
Repeat the procedure on each system that you want to have access to the printer.
Go to Section 5.5 for instructions on running the nsconfig utility.