User`s guide

TCP/IP Configuration
5-12
5.4.4 HP-UX
The nicinst command creates the /usr/nic directory and copies some files. It then starts a
script that prompts you for information. After you complete the script, you add the
information to the lp utility.
1. Use the kill command to stop the scheduler process.
2. Enter the following commands:
lpadmin -p printer_name -v/dev/nic/printer_name -mlaserjet
enable printer_name
accept printer_name
where printer_name is the name specified during the nicinst procedure. You can also
use the other options for the lpadmin command.
3. Restart the scheduler with the following command:
/usr/lib/lpsched
Repeat the procedure on each system that you want to have access to the printer.
Go to Section 5.5 for instructions on running the nsconfig utility.