User`s guide

Section 7.2: NIC Status Page

If the NIC Status page has not been disabled, it prints after the printer is turned on.

However, when NetWare is enabled, the NIC Status page is delayed until the NIC attaches

to the primary file server or exceeds the 4-hop limit. This section explains how to read the

NIC Status Page. The following example of a NIC Status page shows the information as it

appears for a NIC with all protocols enabled.

Unit Serial No: 188365 Version: 03.05

Network Address: 00:40:af:16:fe:68

Network Topology: Ethernet Connector: Thinnet

Network Speed: 10 Mega Bits

Novell Network Information enabled

Novell Print Server Name: DEC_188365

Frame Type: Ethernet II

Password Defined: No

AppleTalk Network Information enabled

Frame Type: 802.2 SNAP On 802.3

Protocol Address: Net Number 189

Preferred AppleTalk Zone: Default Zone

Node Number 19 Socket Number 129

TCP/IP Network Information enabled

Frame Type: Unknown FT

Subnet Mask: 255.0.0.0

Protocol Address:

Default Gateway: 0.0.0.0

LAT Network Information enabled

Frame Type: Ethernet II

Novell Connection Information

Printer Name: finance

File Server: TRASHY

Queue: FINAN_Q Priority: 1 Attached: Yes

Notify: SUPERVISOR First: 1 Repeat: 30

AppleTalk Connection Information

AppleTalk Printer Name: DEClaser 5100 2

TCP Connection Information

Port Number: 10001

LAT Connection Information

Node name: LAT_0040af16fe68

Port name: PORT_1