Specifications

6.5 Load Front or Manual Feed

Explanation: Two sensors monitor the front tray paper path. The front tray

paper sensor detects paper in the front tray. The front tray paper end sensor

detects the end of the sheet as it feeds into the engine.

These messages should clear when the user loads the requested size paper

or envelope. All media feeding is performed through the paper feed unit and

controlled by the paper feed controller board.

The following control panel menus set the paper size and feed device. See the

menu map in Figure A–1 for more information.

• Set the paper size through the Front Tray Size feature of the Feeders

submenu (from the Set-Up key menu).

• Set the feed device through the Default feeder feature of the Feeders

submenu (from the Set-Up key menu).

Signal diagram reference: See Figure 6–2 for wiring diagrams.

Action: Do the following if the messages appear intermittently or fail to clear:

1. Inspect the two front tray sensor linkages. If the linkages fail to move

freely or bind, replace the paper feed assembly.

2. Swap the following FRUs:

• DC control board

• Paper feed controller board

• Paper feed unit

Power and Control Panel FIPs 6–9