Specifications

6.3 Insert or Remove Cartridge

Explanation: These message occur whenever a font cartridge is removed or

inserted while the print is in the fault state during a print job; for example, if

the font cartridge was removed during a paper jam in the middle of a job.

The dc control board cannot recognize the type of installed font cartridge only

the presence or absence of a cartridge .

Signal diagram reference: See the block diagram in Figure 2–2.

Action: Do the following if the display cannot be cleared or if the message

appears intermittently:

1. Make sure the video controller board is installed correctly and the cartridge

connector is undamaged.

2. Swap the cartridge.

3. Swap the video controller board.

Power and Control Panel FIPs 6–7