Specifications

4.11 Formatting the Optional Disk

When a new disk is installed and the printer is powered on, the ﬁrmware ﬁnds

the new disk and enters the following interactive formatting procedure:

1. The Disk Added * message appears.

– Press to continue.

2. The * to format disk message appears.

– Press to start formatting or press any other key to not format.

3. The Formatting disk message appears while the disk is formatting; this

takes about 20 seconds.

4. The Restart printer message appears.

– Power off the printer, then power it on again.

4–12 Test Patterns and Miscellaneous Procedures