Specifications

4.6 About the PostScript Error Report
4.6 About the PostScript Error Report
Figure 4–6 is an example of the PostScript error report. To turn on the
PostScript error report, enter the Enable value found in the Print error sub
menu. (From the Set-Up menu, select the PostScript feature, then the Print
errors selection.)
Figure 4–6 PostScript Error Report
DSG-000476
PostScript Error Report
Ray's HPPS - v1.08+ DEClaser 5100 v2013.109-119

operand stack
(7 elements) dictionary stack (8 elements) error name: typecheck
command: putinterval
errorinfo: 
not displayable
dictype, b4, m4
3 integertype
arraytype, 1-7
arraytype, 1-7
-45.0 realtype
60.0 realtype
savetype
...bottom...
unnamed dict 1220
unnamed dict
23400
statusdict 3720
userdict
2740
lpe$lpsdict
3720
userdict
2740
shareddict
2740
systemdict
354300
...bottom...
graphics state
execution stack
(15 elements)
VM status:
save level: 3
max VM: 1136640
VM used: 128484
VM avail: 1006156
{ cvs }

{ /ok load and exec }
--file--
{ disableinterrupt } 
@aborted
{ cleaninterrupt disableinterrupt ( ) exch 0 exch put clear
} 
@aborted
{ --procedure (array or packedarray) with no read access-- }
@aborted
{ --procedure (array or packedarray) with no read access-- }
@loop
{ --procedure (array or packedarray) with no read access-- }
@stopped ({handleerror} if stop) @exec
current CTM:
[ 8.33 0.0 0.0 -8.33 -2565.0 3234.5 ]
default CTM:
[ 8.33 0.0 0.0 -8.33 -2565.0 3234.5 ]
current font: --none set--
current path: --empty--
current clip path:
size: 4 elements
bbox: [ 14.04 0.06 601.56 776.22 ]
Test Patterns and Miscellaneous Procedures 4–7