Specifications

Graphic display
location of, 3–2
H
H8571 or H8575
Caution and substitution, B–7
Hard disk
non-error FIP, 6–5
remove/replace, 9–11
Hidden switch
see test print switch
High-voltage EP-ED connections, 2–24
HVPSA
circuit description, 2–22
contact plate remove/replace, 9–60
FRU part number, 10–3
remove/replace, 9–7
wiring diagram, 6–22
HVPSA/fuser interconnect
remove/replace, 9–70
wiring diagram, 6–22, 6–24
I
Identifying jam locations, 7–3
IEEE
parallel port value, A–12
Image enhancement
about, A–14
Image enhancement board
FRU part number, 10–3
Indicators
on, off, and flashing, 3–2
Initial rotation (INTR) mode
description, 2–6
during paper feeding, 2–13
during the transfer process, 2–17
INT=
See SER: Interpreter, A–11
Interlock
Fusing exit/rear door sensor
about, 2–12
fusing jumper, 6–22
rear door open, A–11
Interlock (cont’d)
rear door sensor, 9–84
test print switch is wiring diagram, 6–20
top door open message, A–16
top door switch location, 1–3
top door switch wiring diagram, 6–20
Intermittent operation, 6–3
Internal universal cassette
FRU part number, 10–3
Interpreter
selecting features, A–18
INTR mode
about, 2–6
J
Jam
Control panel message, A–11
definition of terms, 7–2
Do jam recovery, A–9
feed area jams, 7–4
feed area swap matrix, 7–5
fusing and delivery jams, 7–6
Jumpers
Ethernet board, 6–6, 9–33
K
Key menu
Feeder Select about, A–9
keys for scrolling and entering, 3–2
structure, 3–6
Key menu messages, A–1
Keys
Locations and operation of, 3–2
L
Laser assembly
wiring diagram, 6–22
Laser safety information, 1–1
Last rotation mode
description, 2–7
LCIT
non-error FIP, 6–5
Physical description, 1–15
Index–4