Specifications

Curvature separation, 2–18
D
DOS See MS–DOS
DC control board
adjustment procedure, 4–10
delivery area jams, 7–6
FRU part number, 10–3
remove/replace, 9–29
DECimage
see PS: DECimage, A–14
DECmultiNET 100e
connectors, 1–9
DECservers
interface, B–7
Default feeder
versus Feeder Select key menu, A–8
Defaults
ports, B–2
Delivery unit
delivery area jams, 7–6
Demo Page, 4–4
Density adjustment
Primary charge, 2–16
Developer roller bias
EP-ED connections, 2–24
Diodes
fusing roller cleaning, 2–18, 8–6
Directionality of parallel port, A–12
Dirt or toner
on back of paper, 8–6
transfer roller cleaning, 2–17
Display
location, 1–3
Display x description of, 3–2
Displays
control panel, 3–2
Distorted printing, 8–11
Do jam recovery, A–9
Document conventions, xi
Documentation, related, D–2
Door open switch
actuator, 9–28
two poles, 6–14
Dots
black page with row of dots, 8–5
separation process, 2–18
Driver
Macintosh, B–6
Drivers
Windows and Windows NT, B–4
Drum shutter
EP-ED connections, 2–24
E
EIA- 232 or 422, B–2
Engine board test pattern, 4–8
Envelope feeder
feed area jams, 7–4
FRU part number, 10–3
non-error FIP, 6–5
remove/replace, 9–57
wiring diagram, 6–25
Environmental requirements, C–6
EP-ED cartridge
connections, 2–24
feed area jams, 7–4
FRU part number, 10–3
remove/replace, 9–40
Error
non fatal and fatal messages, 3–5
PostScript reports, 4–7
Ethernet board
about, 1–19
address printout, 6–6
connectors, 1–9
FRU part number, 10–3
non-error FIP, 6–6
remove/replace, 9–33
Exhaust fan
See entry fan
Exposure, 2–16
Index–2