Specifications

1.2 Physical Description

Table 1–5 LCIT Interconnection

Cassette paper

feed roller

Feeds paper from the internal cassette into the

oblique rollers. The roller is replaced during the 200K

maintenance procedure described in Section 5.3.1.

Size sensing switches There are two sets of size sensing switches: one in the

optional LCIT cassette slot and the other in the internal

cassette slot. Each set consists of three switches.

The size sensing switches read the conﬁguration of

the keys on the side of the installed cassette. This

information is compared to the selected size by the

ﬁrmware. A mismatch causes an error to display.

LCIT interface

connector

This 4-pin connector connects the LCIT controller board

to the feed unit controller.

HVPSA The HVPSA supplies the xerographic charge and bias

voltages.

Physical and Functional Description 1–11