Specifications

A.2 Key Menu Messages
SER: Parity
The parity selection must match that of the attached host or modem. When
this feature is selected, the following values appear:
PARITY= none
PARITY= odd
PARITY= even
PARITY= space
PARITY= mark
SER: Robust XON
The ROBUST XON= off and ROBUST XON= on values appear only when XON
flow control is selected. If the printer’s input buffer empties and the ROBUST=
on value is selected, the printer attempts to wake up the host or network
devices by transmitting one XON character per second through the network
to the host. This feature compensates for the loss of an XON character by the
host or by a network device. See the SER: Flow control entry.
SER: Stop bits
The STOP BITS= 1 or STOP BITS= 2 value must match those of the attached
host or modem. The default is STOP BITS= 1.
SET= Value
For the values associated with this prompt, see the PCL: Symbols entry.
SOU= Value
For the values associated with this prompt, see the PCL: Font source entry.
START PAGE= Value
For the values associated with this prompt, see the Do start page entry.
Set-Up key menu
Press
Set-Up
to enter the Set-Up key menu. The Set-Up key menu is the
most complex key menu, divided into four levels. Selecting any one of the
following features calls up the next level of submenus:
Feeders
PostScript
PCL submenu
PostScript
Communication
Miscellaneous
Key Menu Map, Features, and Values A–19