Specifications

A.2 Key Menu Messages
PS: Print errors
The PRINT= enabled and PRINT= disabled values control the printing of a
PostScript error page after a PostScript error has terminated the print job.
PS: Resolution
This PS: Resolution feature is identical to the PCL: Resolution feature. It sets
the resolution to one of the following values.
RES= 300x300
RES= 600x300
RES= 600x600
RES= 1200x600
RES= 1200x1200
When complex images are printing, insufficient memory can cause complex
page errors that end the print job. Reducing the resolution value can reduce
the likelihood of the complex page errors. For additional information about the
resolution feature see the DEClaser 5100 Printer User’s Guide.
PS: Wait timeout
This feature sets the PostScript wait timeout to one of the following values:
WAIT= 20 seconds
WAIT= 40 seconds
WAIT= 60 seconds
WAIT= infinite
WAIT= set by host
Power saver
The power saver feature turns off the fuser heater after exceeding the selected
value. The message Power Saver On appears while the fuser heater is
turned off. The following values are available:
SAVER= 30 minutes
SAVER= 2 hours
SAVER= 4 hours
SAVER= off
Print PCL fonts
This Test/Fonts key menu feature prints downline loaded, built-in, and
cartridge PCL fonts.
Key Menu Map, Features, and Values A–15