Specifications

9.35 Sensor, Fusing Exit/Rear Door

Use the following procedure to remove the fusing exit/rear door sensor:

1. Remove the following parts:

FRU See section:

a. Left-side cover 9.18

b. Right-side cover 9.19

c. Top cover 9.20

d. Output assembly 9.7

2. Unplug the 3-pin connector from the sensor.

3. Grasp the plastic stub with needlenose pliers.

4. Pull up and backwards to release and disengage the sensor assembly.

DSG-000701

9–84 Removing and Replacing FRUs