Specifications

9.32 Roller, Cassette Pickup
9.32 Roller, Cassette Pickup
Use the following procedure to remove the cassette pickup roller:
1. Remove the EP-ED cartridge.
2. Remove the cassette.
3. Stand the printer on the left-side cover, on top of a soft cloth or paper to
prevent scratching the cover.
4. Pinch the clips and lift the roller off the shaft.
When replacing the roller, make sure the clip firmly holds the roller on the
shaft.
Avoid touching the surface of the pickup roller.
DSG-000696
9–80 Removing and Replacing FRUs