Specifications

9.31 Roller Transfer

Use the following procedure to remove the transfer roller:

Caution: The foam surface of the transfer roller is easily damaged by ﬁnger

oils and perspiration. Contamination can degrade image quality. When

handling the transfer roller, touch only the extreme end of the foam roller or the

metal shaft.

1. Remove the EP-ED cartridge, as shown in Section 9.17.

2. Use the end of the cleaning brush to hook onto the left side of the transfer

roller shaft.

3. Pull up until the shaft releases from the bearing.

4. Move the roller to the left to disengage the right bearing and remove the

transfer roller.

DSG-000695

Removing and Replacing FRUs 9–79