Manualshelf

Specifications

ManualsBrandsDigital Equipment Corporation ManualsAll in One PrinterDEClaser 5100
211212213214215216217218219220
9.30 Pad, Front Tray Separation
9.30 Pad, Front Tray Separation
Use the following procedure to remove the front separation pad:
1. Remove the front tray pickup roller, as shown in Section 9.33.
2. Insert a flat bladed screwdriver in the notch underneath the silver strip.
3. Gently pry the pad up and out of the socket.
When replacing the pad, avoid touching the surface or installing the pad
upside down. When the pad is correctly installed, the silver strip is down.
DSG-000697
9–78 Removing and Replacing FRUs