Specifications

9.27 Interconnect, HVPSA/Fuser

Use the following procedure to remove the interconnect that connects the

fusing unit and HVPSA to the DC control board:

1. Remove the following parts:

FRU As shown in section:

a. LCIT (if installed) 9.10

b. EP-ED cartridge 9.17

c. Right-side cover 9.19

d. Card cage 9.16

e. Video controller board Section 9.15

f. LVPSA 9.5

g. Fusing unit 9.25

9–70 Removing and Replacing FRUs