Specifications

1.2 Physical Description

Table 1–2 Front Tray

Envelope feeder

connector

Connects the optional envelope feeder to the feed unit

controller. It is hidden by a panel when no envelope

feeder is installed. See Section 9.24 for envelope feeder

and panel installation.

Test print switch Use a suitable tool to press this switch. When pressed,

the DC control board feeds and prints one copy of the

engine board test pattern from the internal cassette only.

See Section 4.7 for additional information.

Adjustable paper

guides

The adjustable guide is moved to hold the media against

the ﬁxed guide. Image skewing, paper jams, or bad

image positioning can occur if the adjustable guide is too

loose or over-tightened.

Front tray

and door

Shown in the open position. The tray accommodates

standard size cut sheets and envelopes. The tray is

monitored by the paper end and front tray paper sensor.

Physical and Functional Description 1–5