Specifications

9.12 Board, DC Control
2. Unplug the following connectors:
13-pin J201
8-pin J205
7-pin J206
3-pin J208
3-pin J209
10-pin J210
4-pin J211 that connects to the main motor
6-pin cable that connects to J103 on the LVPSA
3-pin J212
3. Press and release the left and right side restraint clips .
4. Wiggle the DC controller board to extract it from the mounting pin.
5. Remove the DC controller board.
9–30 Removing and Replacing FRUs