Specifications

9.5 Assembly, Low-Voltage Power Supply (LVPSA)
6. Disconnect the 3-pin J104 connector .
7. Unplug the 6-pin J103 connector .
8. Remove the two screws that hold the LVPSA to the printer.
Caution: Do not bend the sheet metal. In the next step you might have to
flex the bottom of the card cage upward to remove the LVPSA.
If the LVPSA cannot be removed, remove the card cage, as shown in
Section 9.16.
9. Use a suitable tool to gently pry the LVPSA out of the printer.
DSG-000643
5 4
9–10 Removing and Replacing FRUs