Specifications

7.5 Phantom Jams

1. Open the rear door and thoroughly inspect:

• The rear door hinge pins and latch.

• The fusing exit/rear door sensor linkages—should move freely with no

binding.

2. Open the top door and inspect the registration sensor lever. It should move

freely with no binding.

3. Inspect the following:

• The J208 connector on the DC control board to the fusing exit/rear door

sensor

• The 13-pin connector that plugs into J201 on the DC controller board

4. Swap the following to ﬁx a phantom jam:

• Fusing exit/rear door sensor

• DC control board

• Paper feed assembly

FIPs for Fixing Paper Jams 7–7