Specifications

6.16 68 Service
6.16 68 Service
Explanation: The page count memory (NVRAM) is full or is bad:
Action:
1. Swap the page count IC.
2. Replace the video controller board.
6.17 Print Engine Wiring Diagrams
Figures 6-2 through 6-5 are the wiring diagrams for the DEClaser 5100 printer.
The following conventions apply to the wiring diagrams:
– Unless otherwise stated, all voltage readings should be within ±5% of the
stated value.
– Voltage level ‘‘low’’ means 0 to +0.5V.
– Voltage level ‘‘high’’ means 5V ±0.5V.
– The bar over a signal name (for example, ) shows that the signal,
when asserted, is low.
Figure 6–6 and Figure 6-7 are the wiring diagrams for the optional envelope
feeder and LCIT.
6–20 Power and Control Panel FIPs