Specifications

6.6 Load LCIT ( Value )
6.6 Load LCIT ( Value )
Explanation: This message indicates that the 500-sheet LCIT cassette is
empty, is the incorrect size, or is not installed. The three LCIT size sensing
switches detect the size of the installed cassette.
Signal diagram reference: Figure 6–7
Action: Do the following if the message appears intermittently or fails to
clear:
1. Make sure the 250-sheet internal cassette is fully installed.
2. Remove and inspect the 500-sheet LCIT cassette. Replace the cassette if
you find any damage. If the cassette is a universal type cassette, make
sure the size sensing cams are set to the correct size.
3. Manually actuate the size sensing switches. Replace the paper feed control
board if the switches stick, bind, or fail to operate.
4. Inspect the linkage of the LCIT paper sensor. Replace the LCIT if the
linkage sticks, binds or fails to work properly.
5. Swap the following FRUs:
• LCIT controller board
• LCIT
• DC control board
• Paper feed controller board or paper feed assembly
• Feed unit and option interconnect
6–10 Power and Control Panel FIPs