Setup guide

2
Connecting the Printer and Installing
Drivers
The DEClaser 5100 printer supports simultaneous connections to its serial,
parallel, and LocalTalk ports, and to an optional network card. Simultaneous
connections allow you to print from three or more different systems. This
chapter describes how to connect interface cables to the printer.
To Connect the
Printer to . . . See . . .
Ethernet Network Section 2.1
IBM or compatible PC Section 2.2
Apple Macintosh computer Section 2.3
OpenVMS VAX or
ULTRIX Systems
Section 2.4
2.1 Connecting to an Ethernet Network
Follow the instructions that come with the optional DEClaser 5000 Series
Ethernet Card to connect the printer to the network and complete the printer
installation.
Connecting the Printer and Installing Drivers 2–1