Setup guide

Downloading fonts to the optional hard disk
A utility is supplied with Version 1.0C (and later) of DECprint Supervisor for
OpenVMS (DCPS) to help you catalog, download, and delete PostScript fonts on
the optional hard disk. The utility is in the SYS$COMMON:[SYSHLP.EXAMPLES.DCPS]
directory.
General use of printer options
Additional step after removing the envelope feeder option
After you remove the optional envelope feeder, Digital recommends using
the Set-Up or Feeder Select menus to reselect the default feeder. This step
prevents anomalous messages indicating the envelope feeder is still in use.
Installing RAM SIMM upgrades
Section E.4 of the User’s Guide describes the installation procedure for optional
RAM SIMMs. You may install a single RAM SIMM in either the top or bottom
slot in your printer. You may also install RAM SIMMs of different sizes in both
slots. The DEClaser 5100 printer has no limitations on the placement or size
of RAM SIMMs, up to the maximum size of 32 MB in each slot.
Ordering the Resolution/Graphics Enhancement Option
The Resolution/Graphics Enhancement Option includes printer firmware
Version 2.15 or later, which is necessary for the correct operation of the option.
The option also requires a minimum of 6 MB of RAM memory.
If your printer has . . . Order option number . . .
2 MB of RAM
1
LN09X-XM
6 MB of RAM LN09X-XF
1
The LN09X-XM option includes a 4 MB RAM SIMM and is designed for printers that have no
RAM SIMMs installed. You may also order the LN09X-XF option and purchase additional RAM
separately.
Using the Resolution/Graphics Enhancement Option
Section 6.3 of the User’s Guide gives incomplete information on the features of
the Resolution/Graphics Enhancement Option. This section replaces the text in
Section 6.3.
9