Setup guide

Font page from the Test/Fonts menu (Print PS fonts) to get a complete
list of your printer’s fonts.
If you use Version 7.6.1 or later of the LaserWriter Utility, you cannot use
the utility to print a list of PostScript fonts.
Using the Adobe Downloader program
The Adobe Downloader program allows you to download fonts to your printer’s
memory or to the optional hard disk, and to display or print a list of your
printer’s fonts. There are two known limitations in this program:
• You cannot download fonts to the optional hard disk when using a
LocalTalk network.
• The program does not display or print any fonts that are built into the
printer but are not used by the program.
Naming your printer on both LocalTalk and EtherTalk networks
With the installation of the optional DEClaser 5000 Series Ethernet Card, you
can use your printer simultaneously on LocalTalk and EtherTalk networks.
If you do not change your printer’s name, the Chooser displays the name
‘‘DEClaser 5100’’ in the Macintosh Chooser, regardless of which network your
computer is currently using.
You can use a utility program, such as LaserWriter Utility, or a PostScript
program to change the name of your printer. This new name is displayed in
the Chooser, regardless of which network your computer is currently using.
The NPMANAGE program that comes with your optional network interface
card allows you to name your printer only on the EtherTalk network. This
means that your printer can have different names on each network.
Using your printer with OpenVMS systems
Correct required version of DECprint Supervisor
Your printer is supported by Version 1.0C (and later) of DECprint Supervisor
for OpenVMS (DCPS).
This problem does not occur with printer firmware Version 1.36 or later.
8